Contact Information
RMZ Oilfield Engineering Pte Ltd
02 Tuas Ave 11Singapore – 638985
+(65) 6265 4972
sales@rmzoilfield.com
Slickline / Wireline Tools are used to lower and raise downhole tools used in oil and gas well maintenance to the appropriate depth of the drilled well. Slickline is used to lower downhole tools into an oil or gas well to perform a specified maintenance job downhole. Downhole refers to the area in the pipe below surface, the pipe being either the casing cemented in the hole by the drilling rig or the tubing, a smaller diameter pipe hung inside the casing. Slickline is more commonly used in production tubing. The wireline operator monitors at surface the slickline tension via a depth counter ‘zeroed’ from surface, lower the downhole tool to the proper depth, completes the job by manipulating the downhole tool mechanically, checks to make sure it worked if possible, and pulls the tool back out by winding the slickline back onto drum it was spooled from.
The RMZ Wireline Lead Impression Block is designed to allow an impression to be taken of objects known or unknown within the well bore. A single jar down is all that is required to obtain an impression and the softness of lead aids to define t [...]
The RMZ GU Adapter converts the standard shear-down GS Pulling Tool and Heavy-Duty GS Pulling Tool into a shear-up release. To convert the GS Pulling Tools into a shear-up tool, remove the shear pin from the GS Tool and screw on the GU Adapter [...]
The RMZ Wireline Universal Bell Guide is designed as an alternative to the use of Bell Skirts. The guides eliminate the need to thread or weld to, the pulling tool or overshot body. The Universal Bell Guide offers the flexibility to interchang [...]
The RMZ Wireline Gauge Cutter is predominantly used for drifting the tubing string but also designed to remove scale, debris, paraffin wax etc. this will ensure that down hole tools will pass through tubing and nipples without obstruction duri [...]
The RMZ Wireline Fishing Neck Clamp or Toolstring Clamp is designed and manufactured to locate around standard toolstring fishing necks. The supporting arms rest on the box section of the wireline valve or riser section to allow extended tools [...]
The RMZ Wire Line Clamps are designed to fix around wire/cable and hold it in order to prevent movement.
The RMZ Wireline Combi Debris Removal Bailer tool, is a multifunctional hybrid tool design to perform the work of Cutter, Start Bit, indexing tool and Bailer simultaneously, thus reduce the operation timing and Work load.
The RMZ Wire Line Center Spear is a wireline fishing tool used to retrieve wire lost downhole. Where the wire has fouled downhole the Center Spear is driven in and the barbs engage. Once the wireline is engaged it cannot be released from the s [...]