RMZ Oilfield Engineering Pte Ltd13 Tuas Ave 13
Singapore – 638985
+(65) 6265 4972
Slickline / Wireline Tools are used to lower and raise downhole tools used in oil and gas well maintenance to the appropriate depth of the drilled well. Slickline is used to lower downhole tools into an oil or gas well to perform a specified maintenance job downhole. Downhole refers to the area in the pipe below surface, the pipe being either the casing cemented in the hole by the drilling rig or the tubing, a smaller diameter pipe hung inside the casing. Slickline is more commonly used in production tubing. The wireline operator monitors at surface the slickline tension via a depth counter ‘zeroed’ from surface, lower the downhole tool to the proper depth, completes the job by manipulating the downhole tool mechanically, checks to make sure it worked if possible, and pulls the tool back out by winding the slickline back onto drum it was spooled from.
The RMZ GS Type Pulling/Running Tool is designed to locate in standard internal fishing necks. To engage the GS Pulling/Running Tool, a sit-down weight is required for automatic engagement. To release the tool, downward jarring activates the r [...]
The RMZ Wireline Stem serves a dual purpose. It provides the necessary weight to overcome the effects of friction, fluid viscosity and pressure. It also provides the kinetic energy which is converted into upward and downward jarring force.
The RMZ Wireline Rope Socket-Pear Drop is the uppermost component in a wireline toolstring and forms an essential link between the toolstring and the wire. It incorporates a tapered plug (pear drop) which is grooved to accommodate the wireline [...]
The RMZ Wireline Grip Rope Socket is the uppermost component in a wireline toolstring and forms the essential interface between the toolstring and the wire. The specially designed Slips and Pre-loaded Initiator Clamp assembly secures the braid [...]
The RMZ Wireline Tubular Linear Jar is a telescoping jar that should be run in conjunction with wireline stem installed immediately above. The linear bearings create a frictionless action, allowing full force of impact from the stem above. The [...]
The RMZ Wireline Dummy Rope Socket is a wireline tool that come with Standard fishneck with rope socket profile on top end and bottom end with standard or customized connection.
The RMZ Wireline Roller stem is special type of stem used to assist upward and downward jarring forces where deviation in a well is encountered and jarring using traditional jars is unsuccessful. The WL Roller Stem is designed to substitute st [...]
The RMZ Wireline Tungsten Filled Stem, sometimes called Sinker Bars, provide the mass required in wireline operations although they should not be used in operations where heavy jarring is anticipated. Tungsten Filled Stems also enable the tool [...]
The RMZ Wireline Releasable Overshot is designed for use when the engagement of a regular pulling tool is impossible due to wear or mechanical damage to the fishing neck. The Releasable Overshot has the advantage that, should the fish become s [...]