The RMZ Air Line Wiper is designed to replace the traditional hydraulically activated line wiper in low pressure operations or to work alongside it in high pressure operations. Compressed air is focused on the cable through nozzles drilled in [...]
The RMZ Floor Stand For Hay Pulley is designed to keep Hay Pulley Sheave in position and protect the wireline from damage should the hay pulley fall down. It direct the wire from winch to Grease Injection head or Stuffing Box.
The RMZ Hydraulic Wireline Annular Valve is designed to seal on a static cable under pressure and is recommended for “Safety while Logging” applications and for perforating with large guns. Positioned above the drilling BOP, or a “Shooting Nip [...]
The RMZ Hydraulic Quick Disconnect is design to allow remote disconnect of high-pressure hose via hydraulic means. Hydraulic Quick Connect is most suitable to be used with pump line or flow line connections between the platform and the floater [...]
The RMZ Compact Pack Off assembly is designed to seal against moving or static slick cable under pressure. Hydraulic powered piston squeeze the independent rubber element which is wrapped around the wire. The element seals on the cable against [...]
The RMZ GS Type Pulling/Running Tool is designed to locate in standard internal fishing necks. To engage the GS Pulling/Running Tool, a sit-down weight is required for automatic engagement. To release the tool, downward jarring activates the r [...]
The RMZ Wireline Stem serves a dual purpose. It provides the necessary weight to overcome the effects of friction, fluid viscosity and pressure. It also provides the kinetic energy which is converted into upward and downward jarring force.
The RMZ Wireline Rope Socket-Pear Drop is the uppermost component in a wireline toolstring and forms an essential link between the toolstring and the wire. It incorporates a tapered plug (pear drop) which is grooved to accommodate the wireline [...]
The RMZ Wireline Grip Rope Socket is the uppermost component in a wireline toolstring and forms the essential interface between the toolstring and the wire. The specially designed Slips and Pre-loaded Initiator Clamp assembly secures the braid [...]
The RMZ Wireline Tubular Linear Jar is a telescoping jar that should be run in conjunction with wireline stem installed immediately above. The linear bearings create a frictionless action, allowing full force of impact from the stem above. The [...]
The RMZ Wireline Dummy Rope Socket is a wireline tool that come with Standard fishneck with rope socket profile on top end and bottom end with standard or customized connection.
The RMZ Wireline Roller stem is special type of stem used to assist upward and downward jarring forces where deviation in a well is encountered and jarring using traditional jars is unsuccessful. The WL Roller Stem is designed to substitute st [...]
The RMZ Wireline Tungsten Filled Stem, sometimes called Sinker Bars, provide the mass required in wireline operations although they should not be used in operations where heavy jarring is anticipated. Tungsten Filled Stems also enable the tool [...]
The RMZ Wireline Releasable Overshot is designed for use when the engagement of a regular pulling tool is impossible due to wear or mechanical damage to the fishing neck. The Releasable Overshot has the advantage that, should the fish become s [...]
The RMZ Wireline Magnet is a special purpose wireline tool that is used to retrieve small magnetically attractable items such as nuts, bolts, tool parts and any ferrous debris lost within the well bore. The outer sleeve prevents debris from be [...]
The RMZ Wireline Lead Impression Block is designed to allow an impression to be taken of objects known or unknown within the well bore. A single jar down is all that is required to obtain an impression and the softness of lead aids to define t [...]
The RMZ GU Adapter converts the standard shear-down GS Pulling Tool and Heavy-Duty GS Pulling Tool into a shear-up release. To convert the GS Pulling Tools into a shear-up tool, remove the shear pin from the GS Tool and screw on the GU Adapter [...]
The RMZ Wireline Universal Bell Guide is designed as an alternative to the use of Bell Skirts. The guides eliminate the need to thread or weld to, the pulling tool or overshot body. The Universal Bell Guide offers the flexibility to interchang [...]
The RMZ Wireline Gauge Cutter is predominantly used for drifting the tubing string but also designed to remove scale, debris, paraffin wax etc. this will ensure that down hole tools will pass through tubing and nipples without obstruction duri [...]
The RMZ Wireline Fishing Neck Clamp or Toolstring Clamp is designed and manufactured to locate around standard toolstring fishing necks. The supporting arms rest on the box section of the wireline valve or riser section to allow extended tools [...]
The RMZ Wire Line Clamps are designed to fix around wire/cable and hold it in order to prevent movement.
The RMZ Wireline Combi Debris Removal Bailer tool, is a multifunctional hybrid tool design to perform the work of Cutter, Start Bit, indexing tool and Bailer simultaneously, thus reduce the operation timing and Work load.
The RMZ Wire Line Center Spear is a wireline fishing tool used to retrieve wire lost downhole. Where the wire has fouled downhole the Center Spear is driven in and the barbs engage. Once the wireline is engaged it cannot be released from the s [...]
The RMZ Lifting Test Plug is multipurpose equipment used to pressure test and lifting component. It provides a safety mean of Capping-off a WLV remaining on a well head. Integrated eye offers a mean of connection to the lifting device. The mai [...]
The RMZ Wireline Calibration Tool features direct lead screw actuation and accurate hydraulic load sensing. In addition, these tools have been designed to be user friendly providing a compact design.
WL Brush is used to brush out scale, waxes or packing debris from the tubing string and tubing nipples prior to running the subsurface devices. Wireline Brushes consist of a wireline sinker bar with 4” diameter holes drilled at varying interva [...]
The RMZ Lifting Clamps are manufactures and Supplied for a wide range of size suitable for lifting lubricators and surfaces pressure control equipment in a safe and controlled manner.
The RMZ Wireline Blind Box is a solid metal tool used when heavy downward jarring is required. The tool is flat on the bottom and is used when boxing off wire at rope socket during fishing operations.
The RMZ Lifting Bail is safe and efficient way of lifting Wireline Valves/BOP’s onto the wellhead. It gives the operator a straight vertical lift, which is essential when connecting quick unions.
The RMZ Wireline Accelerator (standard) is a wireline stretch simulator device used in conjunction with Hydraulic or Spring jars when jarring at shallow depths in the well bore.
The RMZ Hydraulic Tools Catcher is designed to engage the Rope Socket of any tool string that accidently collides with the Stuffing Box and strips the wireline from within the Rope socket. It will prevent the tool string from falling down hole [...]
The RMZ Spreader Lifting Clamps are manufactures and Supplied for a wide range of size suitable for lifting lubricators and surfaces pressure control equipment in a safe and controlled manner.
The RMZ Rapid Load Stuffing Box was designed to overcome the manual handling Problems caused by the Heavy Weight of Standard Stuffing Box. Leaving the heavier main body part of the stuffing box connected to the upper lubricator and designing a [...]
The RMZ PUMP-IN Subs are designed to provide a large flow fluid entry path into the pressure control equipment (PCE) for hydrostatic testing, or for pumping fluid into the well. Pump in Subs can be supplied to suit any application, with either [...]
The RMZ Turnaround Sheave has been specially designed to reduce the overall height of the pressure equipment string. With the conventional pressure equipment system the top sheave is positioned above the tool catcher, grease injection control [...]
The RMZ Lubricator is used to contain well pressure above the well head thereby allowing the wireline tool string to be raised above the well head valve prior to and after wireline operations, enabling the well head valve to be opened and clos [...]
The RMZ Chemical Injection Sub is designed to apply a de-icing agent or corrosion inhibitor to the wireline during well service operations. Installed below the grease injection control head or slickline stuffing box, the RMZ chemical injection [...]
The RMZ Bleed-Off port is required on the lubricator string; the bleed-off subs are available with a 1/2" NPT port for connection of a suitable valve. The Bleed-Off Sub is particularly effective when used in conjunction with Lightweight Lubric [...]
The RMZ Compact Wireline Valves manufactured with different range of Bore diameter and Configuration. Body is made up of monoblock bodies and are available to suit Sour Service and Standard service. Function of Compact Wireline Valve is simila [...]
The RMZ Compact Wireline Valves manufactured with different range of Bore diameter and Configuration. Body is made up of monoblock bodies and are available to suit Sour Service and Standard service. Function of Compact Wireline Valve is simila [...]
The RMZ Compact Wireline Valves manufactured with different range of Bore diameter and Configuration. Body is made up of monoblock bodies and are available to suit Sour Service and Standard service. Function of Compact Wireline Valve is simila [...]
The RMZ Compact Wireline Valves manufactured with different range of Bore diameter and Configuration. Body is made up of monoblock bodies and are available to suit Sour Service and Standard service. Function of Compact Wireline Valve is simila [...]
The RMZ Compact Wireline Valves manufactured with different range of Bore diameter and Configuration. Body is made up of monoblock bodies and are available to suit Sour Service and Standard service. Function of Compact Wireline Valve is simila [...]
The RMZ Compact Wireline Valves manufactured with different range of Bore diameter and Configuration. Body is made up of monoblock bodies and are available to suit Sour Service and Standard service. Function of Compact Wireline Valve is simila [...]
The RMZ Compact Wireline Valves manufactured with different range of Bore diameter and Configuration. Body is made up of monoblock bodies and are available to suit Sour Service and Standard service. Function of Compact Wireline Valve is simila [...]
The RMZ Tool Trap is designed to stop wireline tools from falling back down the well should the wireline accidently break at the Rope Socket when pulling back into the Lubricator. Hydraulic actuation is required to open the flappers prior to r [...]
The RMZ Lightweight Lubricator enables the wireline tool string to be introduced or retrieved from a well bore under pressure. They are normally positioned above the wireline valve, tool trap or quick test sub. High strength steel alloy make t [...]
The RMZ Ball Check Union is an essential equipment in term of overall safety. It is situated directly under the Grease Injection Head (GIH). Its function is to automatically shut off the well if the cable should be pulled off the tool and the [...]